
Deck planner
Plan your bamboo deck
Enter your dimensions and get the exact list of boards, joists, clips and screws you need — plus the installation rules that make a deck last.
1. Your deck
Measure the finished surface. For a complex shape, split it into rectangles or enter the area directly.
2. Your product
Choose the range and the board format. Board length drives joist spacing and clip consumption.
3. Your site
Traffic and exposure change the joist spacing.
4. Your shopping list
Indicative quantities, rounded up. Always confirm with your installer before ordering.
- Deck area
- 24 m²
- With cutting allowance
- 25.9 m²
- Perimeter
- 20 m
- Joist spacing
- 463 mm
| Item | Reference | Quantity |
|---|---|---|
| Decking boards | 1850 × 155 × 20 mm | 91 pcs |
| Joists | 3050 × 60 × 40 mm | 19 pcs56 ml |
| Concealed clips | DC-08A | 432 pcs |
| Starter / finish clips | DC-06 | 24 pcs |
| Stainless steel screws | DS-03 | 456 pcs |
| Driver bit | DB-03 | 1 pcs |
| Adjustable pedestals | — | 112 pcs |
Quantities are indicative and based on dasso consumption tables and the French Avis Technique. Site conditions, board direction and cuts can change the final figures.
Get your list and your nearest supplier
We send you the list and put you in touch with the most relevant dasso partner for your project.
How to install a bamboo deck
The five rules that decide whether a deck stays flat and safe for decades.
- 01
Ventilate underneath
Leave at least 30 mm of free air below the boards and keep the perimeter open. A deck that cannot breathe will cup.
- 02
Drain the water
Give the substructure a 1 to 2 % fall away from the building. Never let water stand under the boards.
- 03
Respect the spacing
Joist spacing follows board length: 462.5 mm for 1850 mm boards, 507 mm for 3040/3050 mm boards in residential use, and 434 mm for those lengths in public use.
- 04
Leave the gaps
5 mm between boards with the clip system, 8 to 10 mm at the perimeter and against any fixed element.
- 05
Maintain
Clean once or twice a year, and oil or saturate if you want to keep the original tone.
